who makes controler?

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
mikep608
Posts: 22
Joined: Tue 25 Dec , 2012 8:38 am

who makes controler?

Post by mikep608 » Sat 19 Jan , 2013 21:36 pm

i was wondering who makes the controler for Denford micromill 2000NS so I know what type of post processor to use in bobcam when creating G code. does it use some sort of FANUC?
Attachments
cncmill.JPG
cncmill.JPG (410.33 KiB) Viewed 3885 times
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: who makes controler?

Post by Denford Admin » Mon 21 Jan , 2013 10:51 am

If the machine control hasn't been changed then it's probably a Baldor controller with the Denford VR milling software to control it.
If so, there is some post processor information here:
https://denfordata.com/bb/viewtopic.php?f=16&t=1370
Top
Post Reply

Return to “Electronics”