// v1.30 - 16/10/2012 - Increased M03 timeout time on Turn270 machines.
// v1.30 - 16/10/2012 - BigMint2 changes to fix timeout when slow spindle...at speed was never finishing when below 200rpm
// Bigmint2 fixes for Feed per rev
// v1.30 - 16/10/2012 - Made it impossible to Turn coolant on/off from controlpanel while another MCode is being processed, eg M06 or M05
Check here to download the latest version of all software:
https://www.website.denford.ltd.uk/suppo ... -downloads
VR Turning v1.30 released 18th Oct 2012
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: