Viceroy Model TDS 1/SCL
Moderators: Martin, Steve, Mr Magoo
-
The Golden Shot
- Posts: 1
- Joined: Mon 28 Mar , 2011 10:03 am
Viceroy Model TDS 1/SCL
Hi all, I'm new to the forum and have just bought a Viceroy Model TDS 1/SCL, don't really know much about it or what I'm capable of doing on it (the limitations are on my behalf) I'll be pestering you all with how to do things, thats if you don't mind
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Viceroy Model TDS 1/SCL
Welcome, there seem to be lots of these machines still around and doing good work.
eg: viewtopic.php?f=14&t=2100
I'm not sure how often those users check on here, so feel free to PM them if you have any specific questions, or feel they could help with a forum post (please share any findings!)
PS, andyb is the local expert on Viceroy
eg: viewtopic.php?f=14&t=2100
I'm not sure how often those users check on here, so feel free to PM them if you have any specific questions, or feel they could help with a forum post (please share any findings!)
PS, andyb is the local expert on Viceroy