Viceroy TDS 1/2 PCS. Autofeed

[franjan5332]

I am a new boy on the block. I have a Viceroy TDS 1/2 PCS with which I am very happy, however a previous owner has dismantled the power feed. Not vital but I would like to re-install it. I have a number of parts but I do not know if they are complete and what I have are badly worn. Has anyone on this forum any experience that I can draw upon?

Many thanks

Frank

[Denford Admin]

I'm sure there are members who can help...maybe some photos of what you do have may help ?

[franjan5332]

Many thanks, will post some pix once I have figured out how to do it on this forum

Frank

[rotorhead]

Hi Frank,

I'm new on here as well, took me a while to figure out the piccy posting procedure, just under the new post editing frame there is a 'browse' button alongside the picture file location slot, hit the browse button, navigate to your suitably reduced [800x600] seems to be acceptable, then hit the button 'add file' just below the 'browse' button, another window will open showing the upload in progress, it will close when it's done, if you've more than one piccy, then repeat the process until done..........simples

Bernard

[franjan5332]

Hi Bernard

Thanks for the help, think I have it sorted. Now to take some shots.

Frank

[Pete.]

PLEASE, keep them 800x600 size or at the most 1024x768.

[franjan5332]

I hope this image is the right size. It shows all parts handed to me and purporting to be the worn items from the autofeed. If anyone can tell me (a) where apares can be obtained and (b) how to dismantle the apron I would appreciate it.

Frank