Hi All
Here is a scanned copy of the software and maintenance manual for my Starmill pictured below. It is for the BBC version running off an RS232 lead.
I hope this helps someone. Feel free to get intouch if you think I could be of assistance.
Regards
Posts: 14
Joined: Tue 01 Sep , 2009 9:53 am
Attachments:
- Starmill manual.pdf
- (2.4 MiB) Downloaded 3927 times
- Electronics Cabinet
- Starmill Electronics.jpg (81.12 KiB) Viewed 23416 times
- front view
- Starmill Front.jpg (46.68 KiB) Viewed 23416 times
Last edited by alastairseggie on Thu 12 Nov , 2009 7:06 am, edited 1 time in total.
CNC Guru
Thanks for taking the time to upload the manuals 
Posts: 1
Joined: Sat 04 Apr , 2015 17:36 pm
Hi
I have just purchased a starmill that has come with an old pc
Running DOS, can I down load a newer version and run through
A laptop with a serial convertor?
Also is the dongle still required? If so is this for license purposes?
Regards Andy
I have just purchased a starmill that has come with an old pc
Running DOS, can I down load a newer version and run through
A laptop with a serial convertor?
Also is the dongle still required? If so is this for license purposes?
Regards Andy
CNC Guru
Denford's cannot off any sort of upgrade for such an old machine.