v1.20 - 17/4/2009 added newturn270NS (auto turret) and newturn270MNS (manual toolchange)
v1.20 - 17/4/2009 fixed bug where controltype 11 was set (11 is not used as type 9 will find a ROHS board and select 55xx automatically)
v1.21 - 29/4/2009 added comms 56 to do a single thread pass in Z for G32 lines - all mints needed to be changed as well (52xx 55xx only)
*this fix is required for QuickTURN 2D Design threading to work*
v1.21 - 9/6/2009 changed Newturn270 mints (55xx, orange Baldor only) to improve reaction time of feed/rev mode
as usual, check here to download the latest version:
https://www.website.denford.ltd.uk/suppo ... -downloads
VR Turning v1.21 released
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: