TU150E and Triac PC DOS boot disc make procedure
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
TU150E and Triac PC DOS boot disc make procedure
TU150E and Triac PC DOS boot disc make procedure
Last edited by bradders on Thu 22 Jan , 2009 12:57 pm, edited 1 time in total.
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
You first need to create a DOS 6.22 boot disc for each machine. From the web site link below
https://website.denford.ltd.uk/support/9 ... s-software
copy the files from FanucMD for Triac.zip to one of the floppies and that should be OK for the Triac.
For the TU150E copy the 4 files, FLSTEP.APP, FLSTEP.EXE, FLSTEP.GRT and FLSTEP.SHP and the FLSTEP.MSG from the TU150E directory from the FLSTEP Software (Cyclone, Generic, Mirac, Novaturn, TU150E). You will also need to add the DRIVERS2.zip files as well.
https://website.denford.ltd.uk/support/9 ... s-software
copy the files from FanucMD for Triac.zip to one of the floppies and that should be OK for the Triac.
For the TU150E copy the 4 files, FLSTEP.APP, FLSTEP.EXE, FLSTEP.GRT and FLSTEP.SHP and the FLSTEP.MSG from the TU150E directory from the FLSTEP Software (Cyclone, Generic, Mirac, Novaturn, TU150E). You will also need to add the DRIVERS2.zip files as well.