Sharpedge TDS 12/16 General arrangement

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Sharpedge TDS 12/16 General arrangement

Post by bradders » Fri 02 May , 2008 10:00 am

Sharpedge TDS 12/16 General arrangement and internal Gouge attachment
Attachments
Sharpedge TDS 1216 General arrangement.pdf
(152.78 KiB) Downloaded 691 times

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

and a parts list too....

Post by Andy B » Wed 19 Nov , 2008 16:44 pm

Sorry its upside-down and a bit cock-eyed - that's what a doc feeder does with creased and damaged drawing film!

Hopefully it should print well enough to get you going if you need info on a Sharpedge though!
Attachments
sharpedge partslist.pdf
Sharpedge parts list
(3.04 MiB) Downloaded 767 times

Post Reply