Micromill 2000 - FMS

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Benny
CNC Expert
CNC Expert
Posts: 201
Joined: Fri 20 Oct , 2006 15:27 pm
Location: USA

Micromill 2000 - FMS

Post by Benny » Thu 29 Nov , 2007 17:30 pm

Customer asks if can set up a default reference point for the coordinates of the robot arm within the control software VR CNC Milling v. 5** so it does not have to be written into the program each time (G28). Is Micromill capable of doing this?
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Mon 10 Dec , 2007 10:25 am

If I understand you correctly, then no.
Unfortunately, G28 has never been implemented to allow for a different "home" position to be specified.

It is down on the new feature requirements list :)
Top
Post Reply

Return to “Micromill / Microturn”