Here is my bit done - all the SP and CH series, plus the SK series from pages 1-8 and 10-14 (courtesy of Triac Whizz).
I've also added a sheet to start identifying the drawing series codes to machines - e.g. BVS= 280VS lathe, SL= 280 Synchro lathe, TR=Triac, etc.
Andy
The old sketch drawing index book
Moderators: Martin, Steve, Mr Magoo
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
More of the register
- Attachments
-
- Denford Drawings Index.xls
- SP, CH series complete and SK series pages 1-8 and 10-14
- (139 KiB) Downloaded 4685 times
-
Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
Hi
after a long delay... ho hum, well I am rather busy at present...
Here's the latest version with Andy B's bit added in, (good work Andy) up to page 26 but some are missing cos I didn't have the print outs with me when I was inputting
- I'll rectify that as time allows.
after a long delay... ho hum, well I am rather busy at present...
Here's the latest version with Andy B's bit added in, (good work Andy) up to page 26 but some are missing cos I didn't have the print outs with me when I was inputting
- I'll rectify that as time allows.- Attachments
-
- Denford Drawings.xls
- (111.5 KiB) Downloaded 5749 times
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com