QuickCam turning

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
Rod
Posts: 5
Joined: Fri 10 Aug , 2007 13:20 pm

QuickCam turning

Post by Rod » Tue 14 Aug , 2007 9:15 am

I've got a downloaded copy of QuickCam Turning V1_3 and the registration disc from a previous version. On start up, QuickCam is demanding access to SecKey.tff but the registration disc is generating a Flash code. Any thoughts on the way forward?

Rod
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 14 Aug , 2007 10:38 am

Email me with your flash code, and I will return a new seckey version:
technical (at) denford (dot) co (dot) uk
Top
Rod
Posts: 5
Joined: Fri 10 Aug , 2007 13:20 pm

Post by Rod » Thu 16 Aug , 2007 8:35 am

Thanks guys, that works. Looking forward to the new version.

Rod
Top
Post Reply

Return to “Software”