
Does anybody have a copy of the bed arrangement drawing BVS110-400 and Bed ML100-402?

CNC Expert


Posts: 156
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.
Yes, I've got a 2 piece photocopy of BVS110 400. Was there anything in particular you needed to know?
Richard
Richard

I am interested in the details of the bed ways in particular which I assumed would be on ML100-402. If you could scan the photo copies of BVS110-400 I would like to add that to my drawing archive. Paul

CNC Expert


Posts: 156
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.
Paul
I've scanned BVS 110 400 but the site here doesn't seem to enable attachments. Are you sure its ML 100 402 you need, the drawing I've got references BVS 100 402.
Regards
Richard Wilson
I've scanned BVS 110 400 but the site here doesn't seem to enable attachments. Are you sure its ML 100 402 you need, the drawing I've got references BVS 100 402.
Regards
Richard Wilson

CNC Expert


You'll find the facility to add attachments at the bottom of the page where you post a reply.

CNC Guru


Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK
BVS drawings added to the 280VS and Synchro drawings thread
ML drawing added to the ML drawings thread
Andy
ML drawing added to the ML drawings thread
Andy

Many thanks to you all.
The drawings were what I needed.
The drawings were what I needed.