Senior scanned drawings

Any info relating to Tom Senior mills and lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Senior scanned drawings

Post by Denford Admin » Thu 31 May , 2012 13:54 pm

These are all Denford Senior drawings - covering a wide range of mills including Junior, M1, Major, VS, E-type,3C, plus accessories such as the knuckle head and slotting attachment.
Attachments
DenfordSeniordrgs-SizeA.pdf
(1.64 MiB) Downloaded 2668 times
Top
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Senior scanned drawings

Post by Andy B » Wed 23 Oct , 2019 9:58 am

More TS drawings:
TS_B-size_DS6-DS39.pdf
TS size B drgs
(1.67 MiB) Downloaded 1214 times
Top
Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Senior scanned drawings

Post by Andy B » Wed 23 Oct , 2019 9:59 am

Knuckle Head drawing photo.
Not great quality but all legible.
TS Vertical Head.pdf
Vertical Head Assy
(315.75 KiB) Downloaded 1185 times
Top
Post Reply

Return to “Senior (Tom)”