** Tristar ** - the bubble gum machine !!!!!!!!!!!
Moderators: Martin, Steve, Mr Magoo
- Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
** Tristar ** - the bubble gum machine !!!!!!!!!!!
God knows what happened to this anyone got one
- HunterScotty
- Posts: 9
- Joined: Sat 02 Dec , 2006 21:12 pm
- Location: Scotland
- Contact:
- davidimurray
- CNC Expert
- Posts: 194
- Joined: Thu 24 Aug , 2006 9:45 am
They must have been important - anyone got a copy of the journal?
http://www.direct.bl.uk/bld/PlaceOrder. ... archengine
http://www.direct.bl.uk/bld/PlaceOrder. ... archengine
- Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
- davidimurray
- CNC Expert
- Posts: 194
- Joined: Thu 24 Aug , 2006 9:45 am
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
If you find it I'll take it off your hands, that'll be a good talking point on the mantelpiece
...bubblegum machine...
can it be converted to take euros
...bubblegum machine...
can it be converted to take euros
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
We have allsorts lying round in the sheds
I will ask Admin to photograph some of the obsolete stock and post the picks.
We dont want to go through all the bits but if someone wanted to Ebay the lot they could make some money at it, we just dont have time!
There are several old controls servo motors, turrets ac motors contactors etc...etc...
We will sell a job lot for a few grand!!
I will ask Admin to photograph some of the obsolete stock and post the picks.
We dont want to go through all the bits but if someone wanted to Ebay the lot they could make some money at it, we just dont have time!
There are several old controls servo motors, turrets ac motors contactors etc...etc...
We will sell a job lot for a few grand!!
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
consider me interested....
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
We have cleared out the stores and keep holding onto stuff thats too good to throw out
Trouble is it never gets used and we dont have a full inventry of what we have or if it works.
We also have an old bar store with racks and materials that have been here for years.
anyone interested can come and have a look round then make a bid.
You will need a big van though
Trouble is it never gets used and we dont have a full inventry of what we have or if it works.
We also have an old bar store with racks and materials that have been here for years.
anyone interested can come and have a look round then make a bid.
You will need a big van though
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
got one of those alreadyYou will need a big van though
how do you think all my toys got here!
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
- davidimurray
- CNC Expert
- Posts: 194
- Joined: Thu 24 Aug , 2006 9:45 am
If I had the room I would be up there like a flash - don't think my other half would be too happy though - I might be getting a motorbike to strip to sell in the next few weeks and I don't know if she has realised it is going in the house!!!!
Triac Whizz - you can open up the Denford supply store!!
Cheers
Dave
Triac Whizz - you can open up the Denford supply store!!
Cheers
Dave