Hi, we are working on a denford CNC milling machine and the problem is we are not able to soft home the machine in the desired co-ordinates... Need help regarding that. Thanks
Regards
FANUC CNC milling(soft homing issue)
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: FANUC CNC milling(soft homing issue)
Which machine and software have you ?
Is the machine physically moving to the home switches and backing off slightly ?
Both vrmilling v2 and v5 have help files showing how to set the work offsets so that the machine datum is in the correct place.
Is the machine physically moving to the home switches and backing off slightly ?
Both vrmilling v2 and v5 have help files showing how to set the work offsets so that the machine datum is in the correct place.
Re: FANUC CNC milling(soft homing issue)
If it's a true Fanuc control then power up with "P" & "Can" pressed.