ST5/108 Chuck backplate for NovaTurn and possibly Starturn.
Used with Pratt 80mm 3 Jaw chuck 9580-00805
ST5/108 Drawing - Chuck backplate
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
ST5/108 Drawing - Chuck backplate
- Attachments
-
- ST5_108.pdf
- (62.26 KiB) Downloaded 1519 times