CNC Apprentice
CNC Apprentice
Posts: 52
Joined: Fri 27 Oct , 2006 17:41 pm
CNC Apprentice
CNC Apprentice
TRIAC Mechanical Maintenance manual

Post by hpdrifter »

HI
Can anyone inform me where I can download a full Mechanical Maintenance Manual for a TRIAC.
I have dowloaded the manuals file from this site but it only contains one page from section 4.

Regards
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France
User avatar
CNC Expert
CNC Expert

Post by Triac whizz »

Is there one????

If it moves oil it - If it don't paint it :lol:
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Site Admin
Posts: 3651
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
User avatar
Site Admin

Post by Denford Admin »

I think Triac Whizz is right, unless your aiming to strip the thing down for an overhaul.

The only thing I would think you may need to adjust is the dovetail taper strips ?
CNC Expert
CNC Expert
Posts: 194
Joined: Thu 24 Aug , 2006 9:45 am
User avatar
CNC Expert
CNC Expert

Post by davidimurray »

I might have a full manual somewhere with part drawings - will have a dig.

Cheers

Dave
Post Reply

Information

Moderators

Martin, Steve, Mr Magoo