Speed and Feed Pot tick boxes
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Speed and Feed Pot tick boxes
If your machine has Speed and Feed Pots and you have just reinstalled VR Milling and the pots don't work, the you may have to activate the pots manually.
- Attachments
-
- Feed and Speed Pots.JPG (46.13 KiB) Viewed 14296 times
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Speed and Feed Pot tick boxes
This has a good tutorial on selecting and configuring your machine in VR Milling (see the .pdf Selecting and configuring the machine):
viewtopic.php?f=2&t=2903
viewtopic.php?f=2&t=2903