Wanted: Cyclone Tailstock

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
Emimec
CNC Expert
CNC Expert
Posts: 125
Joined: Tue 03 Feb , 2009 10:42 am
Location: North London

Wanted: Cyclone Tailstock

Post by Emimec » Fri 11 Mar , 2011 21:12 pm

Tailstock wanted for Cyclone CNC lathe. Any info welcomed about if any castings or patterns still survive, or who did the casting originally.
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Wanted: Cyclone Tailstock

Post by Denford Admin » Mon 14 Mar , 2011 10:16 am

I've found out a bit more, but it would seem few, if any were made.
viewtopic.php?f=33&t=3132

We also have no record of who did the castings but maybe BradTool could help...
Top
Post Reply

Return to “Denford Classifieds”