Cyclone machine parameters

Martin · Post by **Martin** » Thu 19 Aug , 2010 10:10 am

Cyclone OT-A & OT-B/OT-C parameters.

ti nut · Post by **ti nut** » Fri 12 Oct , 2018 16:35 pm

Hi,

Is there any chance the zip files are corrupted? Tried to download and open both files, with different browsers and unzipping software but both seem to be incomplete/corrupted - 0T-A after #0171 and 0T-B&C after #0507.

There is always the chance that I'm missing something entirely..

Martin · Post by **Martin** » Mon 15 Oct , 2018 7:53 am

Have posted again.

ti nut · Post by **ti nut** » Tue 16 Oct , 2018 9:32 am

Thank you for updating these Martin.

Are there 900 series parameters for the 0T-A? The file for the 0T-B&C have these.

Thank you!

Martin · Post by **Martin** » Tue 16 Oct , 2018 10:48 am

The 900 parameters are the Fanuc options so were different on each machine as with the 450 diagnostics.
If you let me have the serial number I may be able to locate a copy.

ti nut · Post by **ti nut** » Tue 16 Oct , 2018 14:13 pm

Thank you for this.

The machine serial number is CY22129 G
It is a Jan '90 build with 0T-A control

Are the 450 diagnostics set based on viewtopic.php?f=33&t=2916 ?

Thank you!

Martin · Post by **Martin** » Wed 17 Oct , 2018 7:26 am

Hope this helps.

GRAY -ARCHERY · Post by **GRAY -ARCHERY** » Thu 21 Sep , 2023 13:05 pm

Hi There, I am looking at purchasing a Harrison TU150 P. Serial Number TP0011. Is this an OT A,B or C machine and do you have an original copy of the parameters? Electrics Serial 3061795

Martin · Post by **Martin** » Fri 22 Sep , 2023 8:18 am

It will be a FANUC OTA Control.

Attached is the Electrical Record Sheet for TP0011 although the control serial number is different.

Information