Dial Thread Indicator - Viceroy Mk 2

[molyneux.mike]

Hello Andy B and David C

I have a price for a 28T gear. I will send you the details in a PM (personal message) to yourselves.

Photo Attached:

Gear Small.jpg (7.76 KiB) Viewed 7442 times

[Denford Admin]

Here are the original dwg files:

[molyneux.mike]

Here are the original dwg files:

Wow!
That was quick , thanks.

[JLambert]

Hi All

I have made a couple of 28T gears to fit my Viceroy TDS 1/1 GB (Metric) Dial Thread Indicator, as per original specifications and made from Meehanite Cast Iron as per original. I have tested them and they work perfectly, engaging accurately and allowing the counter to be used for the other metric threads e.g. 1.75 thread (12mm) etc. With the spacing collar the right length, it engages exactly on the marked line.
Going to make a complete Dial Thread Indictor now, but before I start, I was wondering what interest there would be and what would be a fair price to charge for a 28T gear (or 30T) and a price for the complete assembly with a 30T or 28T gear.
I am just a retired model engineer, but obviously need to make a little profit to cover my time and costs.
If anybody is interested, let me know.

Mike

Mike ... I have a Viceroy and it's missing its dial thread indicator, if you are making a batch, I'd be interested in purchasing one from you...... Jim lambert

[patrick oates]

i would be interested in a 30 tooth gear if anyone has a spare one to sell