Triac VMC, help needed.

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
Robert500
Posts: 1
Joined: Sat 08 May , 2021 17:14 pm
Hardware/Software: Triac VMC
Fanuc

Triac VMC, help needed.

Post by Robert500 » Sun 09 May , 2021 13:46 pm

Hello, just got myself a Triac VMC, year 1994.
the machine came without boot up disk and so i have made a floppy that containes: Dos, fanucmd.zip and Driers.zip / Drivers2.zip from denford site.

when booting I get the following error message: error 130 Cant find installation program.

Can somebody explain what im doing wrong?
attaching some Photos. Tell me if you need any more info/pictures.



/Robert.
Attachments
20210506_220251.jpg
20210506_220251.jpg (350.94 KiB) Viewed 5632 times
20210506_204222.jpg
20210506_204222.jpg (528.72 KiB) Viewed 5632 times
20210429_222902.jpg
20210429_222902.jpg (504.67 KiB) Viewed 5632 times
20210506_204923.jpg
20210506_204923.jpg (549.92 KiB) Viewed 5632 times
20210506_215345.jpg
20210506_215345.jpg (334.04 KiB) Viewed 5632 times

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Triac VMC, help needed.

Post by Martin » Mon 10 May , 2021 13:52 pm

It looks like you have 3 different directory's for the software All the files should be in the same one.

Post Reply