Material Size on Mill CAM Designer
Moderators: Martin, Steve, Mr Magoo
Material Size on Mill CAM Designer
Is there anyway of increasing the maximum permissible material size (290x170) in Mill CAM Designer?
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Have a look in C:\Denford\Config
Edit FanucM.ini with Notepad (or any text editor)
Search for your machine (Triac ?)
Change the appropriate values as shown here:
Edit FanucM.ini with Notepad (or any text editor)
Search for your machine (Triac ?)
Change the appropriate values as shown here:
[Triac PC (metric)]
Library=C:\Denford\Libs\FANUCM.SLB
Extension=FNC
Metric=1
Max Material Length=290
Max Material Width=170
Max Material Height=100