Page 1 of 1

Artcam and Roland Machines

Posted: Mon 28 Apr , 2008 15:53 pm
by Benny
Is there an Artcam post for a Roland MDX -20.

Artcam and Roland Machines

Posted: Mon 28 Apr , 2008 15:54 pm
by Benny
ArtCAM has several post processors for the Roland machines. I have been told that sometimes getting the software to communicate with the Roland's can be a bit of a challenge and a trial and error thing. The first post processor to start out trying inside ArtCAM would be - RolandMDX1520.con. Delcam has had success with several MDX-20's using ArtCAM so it shouldn't be too big a deal.