Page 1 of 1
Whats the best software for my ORAC
Posted: Sat 15 Sep , 2007 23:20 pm
by tonywolst
Only just got it and playing with TURBOCNC ant the moment and finding it basic fancy the VR software, What do you think?
Thanks.
Posted: Sun 16 Sep , 2007 11:50 am
by Triac whizz
not sure what you mean by software there as turbocnc is for controlling the machine (ok so it's sw) & VR sw is for making bits.
do you want something for driving the orac or a CAD CAM package? (drawing & making bits)
Posted: Tue 18 Sep , 2007 17:00 pm
by tonywolst
Hi,
Will the VR sw work, Im re learning cnc programing and want to see the tool path drawn before i start to cut, just piece of mind.
Thanks
Posted: Mon 24 Sep , 2007 11:11 am
by Denford Admin
Our current lathe CAD / CAM software is pretty basic as well (LatheCAM).
The VR Turning software shows the tool path / finished part quite nicely, but wouldn't be able to control the ORAC, and may not show the same results as the machine, from the same CNC program.
You could experiment with a VR Turning demo version - if I remember correctly, you can enter and simulate around 30 lines of CNC code...
https://www.denfordata.com/downloads/VRTurning-Demo.zip
(7Mb zip file)