Dear All
I am having a flat bed CNC turning with fanuc ot-d control.
The batery of the machine went dead and I had to reload all the parameters and ladder again.
Now the machine is up again but when I try to run a program the turret intex and the spindle starts but when G00 comes it does not rapid traverse, also G01 is also not working.
Their are no alarms.
Please Help.
Thanks in advance
G00 and G01 not working
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: G00 and G01 not working
I would suspect that something has been missed and that a feedhold condition is being set in the logic somewhere - possibly by an option like a keep relay .
If you can see a "live" view of the logic, have a look for the feed hold symbol (I can't remember what it is now...maybe *SP
)
If you can see a "live" view of the logic, have a look for the feed hold symbol (I can't remember what it is now...maybe *SP
)-
sudhirudar
- Posts: 7
- Joined: Mon 02 Nov , 2009 10:04 am
Re: G00 and G01 not working
Thanks Sir
The Problem is solved
But now i am un able to cut threads.I have tried G33, G76, G92, G76
The Problem is solved
But now i am un able to cut threads.I have tried G33, G76, G92, G76
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: G00 and G01 not working
What was the problem and fix ?
I'm sure threading will be a parameter option which must be payed for and turned on to work (ie a 9000 option parameter usually available as a printout which came with the machine)
I'm sure threading will be a parameter option which must be payed for and turned on to work (ie a 9000 option parameter usually available as a printout which came with the machine)