Customer Writes ...............
I have a 1996 Novamill with Denford Heidenhain software.
I need to know which Heidenhain equivalent version the Denford software ( On the disk it says ver 2.119) is so that I can load post processors into my cad-cam program.
Can you help me please.
Denford Heidenhain software 1996
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Denford Heidenhain software 1996
I would pick an old Heidenhain from your post processor, something like TNC 155 or TNC 355 and pick Heidenhain dialogue if you have the option.