Customer interested in “STEP file importation” He is familiar with stl, jpeg, dxf’s, but says he is interested in knowing if Denford machine / software can use “STEP file Importation” i.e. a STEP file from CAD directly to the machine or is there some other process. STEP files normally contain 3D geometry data of solid models.
Any idea?
Thank you.
STEP File Importation
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
I understand STEP is a more advanced way of describing 3D geometry than STL.
It would involve a lot of work for Denford to implement STEP import and I wonder what benefit there would be ?
I would say that 99% of 3D modelling packages can output STL files, so why not use that when it works so well ?
Adding support for a complicated file format would be prone to import errors.
When using CAM software, the STEP model would be broken down into simple triangular faces for tool path calculations anyway. Any extra 3D information (I'm guessing- face loops, material mapping, construction parameters, planes, object groups etc..) is not required for CAM processing.
It would involve a lot of work for Denford to implement STEP import and I wonder what benefit there would be ?
I would say that 99% of 3D modelling packages can output STL files, so why not use that when it works so well ?
Adding support for a complicated file format would be prone to import errors.
When using CAM software, the STEP model would be broken down into simple triangular faces for tool path calculations anyway. Any extra 3D information (I'm guessing- face loops, material mapping, construction parameters, planes, object groups etc..) is not required for CAM processing.