Problems installing USB Drivers for the PCB Engraver on Windows 10

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Steve, Mr Magoo, Martin, bradders

Post Reply
Roberto Brenes
Posts: 1
Joined: Sun 06 Nov , 2022 21:40 pm
Hardware/Software: PCB Engraver

Problems installing USB Drivers for the PCB Engraver on Windows 10

Post by Roberto Brenes » Sun 06 Nov , 2022 21:56 pm

Hello form Costa Rica!

I work in an Electronics lab and we have a PCB Engraver, the PC that we used had windows 7 so we want to upgrade this PC with a Windows 10 PC to work with the PCB Engraver.

The problem is when I try to install the USB drivers using the installation wizard it does not work :(
I have also tried to run the application file for the drivers, I even tried a Windows 8 PC but it does not work.
I have the Disc and it has the drivers but I cannot get the PC to install the drivers

Have anyone had this problem? or how can I get the drivers for the PCB Engraver?

Thanks!

Martin
CNC Guru
CNC Guru
Posts: 1858
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Problems installing USB Drivers for the PCB Engraver on Windows 10

Post by Martin » Mon 07 Nov , 2022 14:51 pm

You can download the latest version of PCB Engraver from the Denford website.

https://www.denfordata.com/downloads/PC ... er-1.9.zip

Post Reply