Missing TwoFishDLL.dll from Quickcam 4D install

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Missing TwoFishDLL.dll from Quickcam 4D install

Post by bradders » Mon 04 Feb , 2013 13:06 pm

Missing TwoFishDLL.dll from Quickcam 4D install
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Re: Missing TwoFishDLL.dll from Quickcam 4D install

Post by bradders » Mon 04 Feb , 2013 13:10 pm

TwoFishDLL.dll is to do with the encryption security for the SecKey.tff files and is normally installed into c:\windows\system32
Attachments
TwoFishDLL.rar
(129.13 KiB) Downloaded 639 times
Top
User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Missing TwoFishDLL.dll from Quickcam 4D install

Post by Denford Admin » Mon 04 Feb , 2013 13:24 pm

and as a .zip
Attachments
TwoFishDLL.zip
(158.21 KiB) Downloaded 625 times
Top
Post Reply

Return to “Software”