Does Denford software work with Windows 7 (32bits/64bits)?

CNC related queries on software; firmware; DOS; Windows; parameters; programming; error messages etc.

Moderators: Martin, Steve, Mr Magoo

Post Reply
davidfhu
Posts: 33
Joined: Fri 23 Oct , 2009 15:27 pm

Does Denford software work with Windows 7 (32bits/64bits)?

Post by davidfhu » Mon 22 Mar , 2010 3:06 am

Hi,

I wonder does Denford software work with Windows 7 (32bits/64bits)?
Best regards,

David Fhu

“Dream as if you'll live forever, live as if you'll die today.” - James Dean
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Does Denford software work with Windows 7 (32bits/64bits)?

Post by Denford Admin » Mon 22 Mar , 2010 12:10 pm

Most do:
https://www.denford.ltd.uk/index.php?opt ... &Itemid=52

note that there is, as yet, no support for 64-bit on the Machine/USB driver side.
Top
davidfhu
Posts: 33
Joined: Fri 23 Oct , 2009 15:27 pm

Re: Does Denford software work with Windows 7 (32bits/64bits)?

Post by davidfhu » Mon 05 Jul , 2010 8:28 am

Thank you, Denford Admin.
Best regards,

David Fhu

“Dream as if you'll live forever, live as if you'll die today.” - James Dean
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1451
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Does Denford software work with Windows 7 (32bits/64bits)?

Post by Steve » Mon 05 Jul , 2010 9:20 am

The 64 Bit driver has now been released:

This went out in version 5.33

viewtopic.php?f=2&t=2860

A new version 5.34 will be uploaded today this has a newer version of the 64 bit driver.
Top
Post Reply

Return to “Software”