VR Turning v1.53 released 11th November 2020

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3602
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.53 released 11th November 2020

Post by Denford Admin » Wed 11 Nov , 2020 11:54 am

VR Turning v1.53 released 11th November 2020

// v1.53 - 11th November 2020

Check here to download the latest version of all software:
http://website.denford.ltd.uk/software- ... s-support/

If there is a blank line in the GCode and line numbering is activated, the blank line is kept but not numbered. Previously having a blank line would clear all the gcode out.

Post Reply