VR Turning v1.35 released 22 November 2013

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.35 released 22 November 2013

Post by Denford Admin » Thu 31 Oct , 2013 17:37 pm

V1.35 - 22/11/2013 - Tool change allowed in jog mode
- Focus stays on Machine Control window when the guard is open
- Revised tool library
- Tool change dialogue box includes the tool name as well as number
- Jog keys changed for Turn270PROM

Post Reply