VR Turning v1.30 released 18th Oct 2012

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Turning v1.30 released 18th Oct 2012

Post by Denford Admin » Thu 18 Oct , 2012 9:39 am

// v1.30 - 16/10/2012 - Increased M03 timeout time on Turn270 machines.
// v1.30 - 16/10/2012 - BigMint2 changes to fix timeout when slow spindle...at speed was never finishing when below 200rpm
// Bigmint2 fixes for Feed per rev
// v1.30 - 16/10/2012 - Made it impossible to Turn coolant on/off from controlpanel while another MCode is being processed, eg M06 or M05

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

Post Reply