Restore Tooling to default values in VR Turning v1.xx

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Restore Tooling to default values in VR Turning v1.xx

Post by Denford Admin » Tue 24 Nov , 2009 13:08 pm

If you don't want to re-install VR Turning, then you can selectively restore certain files which hold the tooling data in VR Turning:

Find the VR Turning CD, or download it from the denford website: http://www.website.denford.ltd.uk/suppo ... -downloads

Make sure VR Turning is closed !
tooling-vrt.gif
tooling-vrt.gif (9.91 KiB) Viewed 9028 times
To restore the tooling setup and offsets: On the CD locate: VR Turning CD-ROM\VRTurn\Bin\Tooling Files\*.tft
Copy the .tft files to C:\Program Files\Denford\VRTurning\Tooling Files

tooling-library-vrt.gif
tooling-library-vrt.gif (16.64 KiB) Viewed 9028 times
To restore the tooling library: On the CD locate: VR Turning CD-ROM\VRTurn\Bin\vrturn.ttd
Copy the file to C:\Program Files\Denford\VRTurning\

Post Reply