NOVATURN TNR comp
Moderators: Martin, Steve, Mr Magoo
NOVATURN TNR comp
Hello,
We are running a 1999 NOVATURN with vr turning version 1
when using g41/g42 the simulation just stops ? also the machine has a front toolpost but when I change the tool configuration the simulation wont use the tools I have ticked front toolpost in the parameters
any ideas ?
Thanks
We are running a 1999 NOVATURN with vr turning version 1
when using g41/g42 the simulation just stops ? also the machine has a front toolpost but when I change the tool configuration the simulation wont use the tools I have ticked front toolpost in the parameters
any ideas ?
Thanks
- Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
tnr comp
Hello,
got the new version but still having problems with this prog. on the finish cycle machine stops on the z-48 line.
O1201;
G21;
G50S3000;
G40G99;
T0101M06;
G96S200M3;
G0 X27 Z0;
G1X-1F0.2;
G0X27.Z2.;
G71U2.R1.;
G71 P100 Q101 U.25 W.25 F0.25;
N100 G0 X7. G41;
G1 X15.9 Z-2.5 F0.15;
Z-20.;
X18.;
X20 Z-21.;
Z-35 R1.;
X23.;
X25. Z-36.;
Z-48.;
N101 X28 G40;
G70 P100 Q101;
G28UO W0;
M30;
got the new version but still having problems with this prog. on the finish cycle machine stops on the z-48 line.
O1201;
G21;
G50S3000;
G40G99;
T0101M06;
G96S200M3;
G0 X27 Z0;
G1X-1F0.2;
G0X27.Z2.;
G71U2.R1.;
G71 P100 Q101 U.25 W.25 F0.25;
N100 G0 X7. G41;
G1 X15.9 Z-2.5 F0.15;
Z-20.;
X18.;
X20 Z-21.;
Z-35 R1.;
X23.;
X25. Z-36.;
Z-48.;
N101 X28 G40;
G70 P100 Q101;
G28UO W0;
M30;
- Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
- Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
- Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: