Arrows on key board doesn't work

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
HITech
Posts: 4
Joined: Tue 29 Aug , 2006 15:15 pm
Location: Medina, OH 44256 USA
Contact:
Contact HITech

Arrows on key board doesn't work

Post by HITech » Wed 07 Feb , 2007 22:08 pm

I have a Microturn 2000

When in the jog mode the arrow keys on the key board do not work.

I have reloaded the software and have changed out key boards and that didn't work.

What have I missed/

Help!!

HITech
HITech is the Exclusive Denford Dealer for Pennyslvania & New York.

Brian Haskell is the former National Sales Manager for Denford from 1994-2003.
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Thu 08 Feb , 2007 8:44 am

Are the axis position numbers on the screen changing when you are trying to jog ?
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 08 Feb , 2007 10:03 am

Also double check the parameters defining the jog keys have not been tampered with.....
Attachments
vrturning-jog-keys-setup.gif
You can change the jog key definitions in here
vrturning-jog-keys-setup.gif (33.1 KiB) Viewed 10164 times
Top
User avatar
boots
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

Post by boots » Wed 07 Mar , 2007 20:44 pm

On the control panel in the lower right corner what is the "F(eed): --% S(peed):--%" ?
Your Feedrate Override may be turned all the way down.
Some machines will give you a warning that the feed rate is turned down to zero, not all machines warn you.
Top
milburn
Posts: 3
Joined: Wed 31 Jan , 2007 17:44 pm

Jog Keys not working

Post by milburn » Thu 26 Apr , 2007 9:51 am

I am having the same problem on VR milling 2.31. I have updated the software, changed default jog buttons, and changed the feed rates. The axis positions numbers are not changing at all.

The home button seems to work. The default coordinates are 0,0,0 and they move slightly when I click 'Home All', and return to 0,0,0.

I am connecting to a Microrouter and have tried selecting different machines in the "Setup Machine Parameters.." (ROUTER, ROUTERV3, ROUTERV3PRO, etc)
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 26 Apr , 2007 15:09 pm

I am having the same problem on VR milling 2.31
In all versions of VR Milling and Turning, the Jog mode has to be selected, and there will be a green indicator to say that its able to jog.

If you click on another window the Jog control panel looses focus and you aren't able to jog.

It could also be down to feedrate override - the system may think you have an external override pot fitted where there isn't one - resulting in a permanent override of 0%.
Usually the default parameters are correct, but some machines can be different to the default.

Are you sure the jog keys are changed to what you wanted ?
Remember that each machine you have tried will have its own setup for the Jog keys
Top
Post Reply

Return to “VR Turning - All Versions”