VR Turning 6.15 released 17th October 2023

Help and advice for Denfords lathe control software VR Turning.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3629
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse

VR Turning 6.15 released 17th October 2023

Post by Denford Admin » Tue 17 Oct , 2023 15:00 pm

VR Turning 6.15 released 17th October 2023

Check here to download the latest version of all software:

//17th October 2023
On machines with the manual toolchange button, it was possible to start jogging while the carousel was in motion, or to start the toolchange while jogging. Stopping jogging would then also stop the carousel from turning, and leave the wrong tool in place. It is now no longer to manually change the tool while jogging, and vice versa.

Post Reply