VR Turning - Secret Home
Moderators: Martin, Steve, Mr Magoo
VR Turning - Secret Home
Secret Home for VR Turning?????
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Yes - see attached picture. ...
Warning - The secret home button is only useful if you are having problems with the home switches or dogs - allowing you to move the axes out of the way for maintenance.
The machine MUST be homed normally at all times otherwise you can damage your machine by running into deadstops and possibly running the nut off the screw.
Warning - The secret home button is only useful if you are having problems with the home switches or dogs - allowing you to move the axes out of the way for maintenance.
The machine MUST be homed normally at all times otherwise you can damage your machine by running into deadstops and possibly running the nut off the screw.
- Attachments
-
- Pressing secret home allows machine to be moved without homing - use with caution !
- vrturning-secret-home.gif (14.65 KiB) Viewed 5980 times