CIM-Denford-Fanuc-backup problem

Help and info about Denfords CIM* and Virtual Reality CIM systems Robots and ASRS**
*(Computer Integrated Manufacturing) **(Automated Storage and Retrieval System)

Moderators: Martin, Steve, Mr Magoo

Post Reply
ar89
Posts: 4
Joined: Wed 27 Apr , 2011 10:09 am

CIM-Denford-Fanuc-backup problem

Post by ar89 » Wed 27 Apr , 2011 16:01 pm

Hi! I am using 3-axis Denford Triac milling machine with Fanuc 21i-M control.

my lab subordinate accidently deleted all the data and system files from the fanuc control.

now when i switch on the control...all keys are disabled and i am left with this single menu shown below. plz help to proceed from this menu...as no mode can be enabled and unfortunately i've got no backup.
Attachments
123.JPG
123.JPG (71.85 KiB) Viewed 10137 times

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: CIM-Denford-Fanuc-backup problem

Post by Martin » Wed 27 Apr , 2011 18:22 pm

What is the serial number of the Triac?

ar89
Posts: 4
Joined: Wed 27 Apr , 2011 10:09 am

Re: CIM-Denford-Fanuc-backup problem

Post by ar89 » Thu 28 Apr , 2011 6:57 am

i have attached a pic of the specs of my machine
Attachments
123.jpg
123.jpg (77.63 KiB) Viewed 10128 times

Post Reply