MicroMill Conversion to GRBL!

Other CAD CAM systems used by Denford machine users but not supported by Denford themselves.
eg BobCAD, Dolphin, MasterCAM, Inventor, AutoCAD, EdgeCAM, DraftSight, Blender, SketchUP, TurboCAD, FeatureMill, SurfCAM, Mach3

Moderators: Martin, Steve, Mr Magoo

Post Reply
backyard_cnc
Posts: 4
Joined: Sun 21 Mar , 2021 4:03 am

MicroMill Conversion to GRBL!

Post by backyard_cnc » Wed 14 Apr , 2021 5:53 am

While looking for options to get my Denford Micromill off of DOS and running under something more user interface friendly I came accross this very elegant solution. It’s a plug and play conversion to GRBL for the SmartStep/3 that looks pretty well designed. I was hoping for a conversion with the option of a 4th axis but at less than $100 and the appeal of plug and play the attraction was too strong and I immediately ordered one up and it should be here next week. It’s also open source so you can build it yourself if so desired.

Check it out at https://damped.ca/denfordController/

Gerald
Top
Post Reply

Return to “Other CAD CAM and CNC”