Hey
i am having bit of a headache with a old Triac Fanuc- OM-B machine from 1988ish.
i have tried using EdgeCam to send cnc codes, but i seems that the post processor ain't right. it says that i am using a wrong code.
tried sevreal driffrent set ups, but haven't got any further.
so what i am wondering about now is:
1.Will Quickcam 3D work with this machine, just plug it in and be on my way
2. how expensive is quickcam
3. will i need both quick cam and vr milling v5, can i just use one of them and wich is best
4.does VR milling v5 work with triac fanuc OM-B, how much does it cost
Big thanks
QuickCam 3D VR milling v5 on Triac fanuc OM-B
Moderators: Martin, Steve, Mr Magoo
Re: QuickCam 3D VR milling v5 on Triac fanuc OM-B
QuickCAM 3d is no longer supplied.
QuickCAM 2D may work as the codes used are Fanuc based.
VR Milling would not be suitable for running a Fanuc machine.
If you wanted a 3D Cam Package QuickCAM PRO should work.
You may have an issue as the programs created can be quite large and may not fit in the memory of the machine.
QuickCAM 2D may work as the codes used are Fanuc based.
VR Milling would not be suitable for running a Fanuc machine.
If you wanted a 3D Cam Package QuickCAM PRO should work.
You may have an issue as the programs created can be quite large and may not fit in the memory of the machine.