QuickCAM PRO v1.13 released 7th Nov 2012

Help and support using the 3D and Bitmap Machining CAM packages:
QuickCAM 3D, QuickCAM 3D Pro, QuickCAM 4D (rotary axis CAM)

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickCAM PRO v1.13 released 7th Nov 2012

Post by Denford Admin » Wed 07 Nov , 2012 10:49 am

v1.13 Fix to default Z height when Billet bounds selected...it should have set the cutplane height for min Z, not the bottom of the billet. (error was introduced in v1.12)

check here to download the latest version:
http://website.denford.ltd.uk/index.php ... -downloads

Graeme
Posts: 23
Joined: Thu 01 Nov , 2012 22:48 pm
Hardware/Software: denford

Re: Quickcam Pro - creating machine code.

Post by Graeme » Sun 28 Apr , 2013 18:40 pm

Hi, Sorry for what is probably a basic question, but could you kindly bullet point the stages required to transfer the code from a planned and saved bitmap image within quickcampro to vr milling program? I'm either expecting the imposible or missing the obviouse.

Many thanks, Graeme

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: QuickCAM PRO v1.13 released 7th Nov 2012

Post by Denford Admin » Mon 29 Apr , 2013 8:50 am

This post has the Lithophane tutorial which can also be got from the Help menu in QuickCAM Pro
viewtopic.php?f=6&t=639

There are some more .pdf help files here (for different software but the machining advice will be the same):
viewtopic.php?f=6&t=2596

Post Reply