If you get a message like this:
List Index Out Of Bounds -1
When you get to the final post output screen in QuickCAM 3D or Pro, then there is something wrong with the way the software has been installed - its probably a network drive issue, or the software needs removing and re-installing again.
To check, you should have a list of files like these in this directory:
C:\Documents and Settings\All Users\Application Data\Denford\Posts
Boxford V10.ppl
Denford (Floating Head Metric).ppl
Denford (Inch).ppl
Denford (Metric).ppl
Denford (Soft Metric).ppl
DenfordPostProcessor.zip
eduCAM.ppl
Larken Camtool Router.ppl
MultiCAM Router.ppl
Pacer.ppl
Post Help.txt
proLight.ppl
Roland Modela.ppl
Techno-G-Code.ppl
Triac PNC.ppl
List Index Out Of Bounds on final screen
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3649
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: