QuickCAM PRO v1.23 released 14th June 2021

Help and support using the 3D and Bitmap Machining CAM packages:
QuickCAM 3D, QuickCAM 3D Pro, QuickCAM 4D (rotary axis CAM)

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3598
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickCAM PRO v1.23 released 14th June 2021

Post by Denford Admin » Mon 14 Jun , 2021 12:21 pm

QuickCAM PRO v1.23 released 14th June 2021

Two bug fixes :

1. If a car was first modelled with axle holes, those axle holes would not be reset and carried over into the next model, even if it wasn't a car. Axle holes will now always reset themselves.

2. If the 4th rotary fixture on the CNC file output page was hidden initially by not modelling a car, and then a car was modelled, the option would not always appear. It will now always appear if a car is being modelled.


Check here to download the latest version:
http://www.denfordata.com/downloads/qui ... ov1_23.zip

Post Reply