Denford F1 Fixture Parts Description

Information and tips about the F1 In Schools, 4x4 In Schools and GT Racing in Schools challenges.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1439
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Denford F1 Fixture Parts Description

Post by Steve » Wed 22 Feb , 2012 10:50 am

Denford F1 Fixture Parts Description..
Attachments
F1 Fixture Parts (Large).jpg
F1 Fixture Parts (Large).jpg (77.86 KiB) Viewed 10607 times

Martin
CNC Guru
CNC Guru
Posts: 1901
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Denford F1 Fixture Parts Description

Post by Martin » Mon 02 Sep , 2013 10:56 am

The part numbers shown here are for a qty of 1 of each item.

If you need the NR1/0426 then you need to order 2 of these.

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1439
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Denford F1 Fixture Parts Description

Post by Steve » Tue 14 May , 2024 9:20 am

With the introduction of the F1 Model Block made of foam the bore of the billet was reduced to 18mm.

As a result the spiggot is now a smailler dimension
Attachments
revised fixture parts.jpg
revised fixture parts.jpg (101.52 KiB) Viewed 234 times

Post Reply