Battery Replacement MicroMill
Posted: Tue 23 Mar , 2021 8:03 am
So the battery on my recently acquired MicroMill was somewhat leaky after some 22 years which is not surprising so I cleaned up the mess with a Safety Wash chemical for now to prevent further corrosion before I can source a replacement. Surprisingly it still measures 1.8v so it hasn’t gone totally flat given its 2.4V initial rating. Can I just swap the old one out for new or are any onboard parameters lost?
- 60E7C541-5720-430F-899B-21FB1893E6DD.jpeg (519.36 KiB) Viewed 3738 times
- 8809531C-0426-4E78-9404-5A23BD38F531.jpeg (540.78 KiB) Viewed 3738 times
- C5BCB031-4158-4B14-A9A6-D17E261C978B.jpeg (401.01 KiB) Viewed 3738 times
- 18DDBA0E-621F-49A4-A0B4-AD73AEDC96B3.jpeg (452.64 KiB) Viewed 3738 times