Gecko G540 Red Led Issue

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
Posts: 2
Joined: Tue 12 Jan , 2021 20:58 pm
Hardware/Software: Denford Easimill

Solidworks, Mach3

Gecko G540 Red Led Issue

Post by Wobbler » Sat 27 Feb , 2021 14:47 pm

Hi All :cry:
I have an EASIMILL which I bought recently with issues.
It has been retrofitted with a GECKO G540 but nothing worked.
I have re-wired it checking the Led status as I went all seemed okay and I had the green led.
I started to plug in the DB9's for the motors and my problems started.
As soon as I plug in more than one the Led turns red. It doesn't matter which axis or channel, as soon as I plug in more than one we go to red.
I re-wire the DB9's on the motors but still have the same problem.
Can anyone offer a suggestion or advise of a service centre in the S.W.
Thank you

Post Reply