"-" on the Baldor 7 segment display
Posted: Fri 29 Sep , 2006 7:17 am
I am getting a "-" on the Baldor 7 segment display when i try and boot up the machine tool
For a Nextstep board (GREEN 7 segment display) "-" means that the Firmware is missing from the Baldor control board. Use the EASY UPGRADER utility found on out web site (www.denford.ltd.uk or www.denford.co.uk)
For a Denstep board (RED 7 segment display) "-" means that the servo power is off, check the 24v power supply i.e. fuses and the fuse on the Denstep board its self