mint I/O data collection

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
neilo
Posts: 3
Joined: Mon 02 May , 2022 18:31 pm
Hardware/Software: VMC 1300 , Turn 270 , Router 2600. VR-Milling-V5, VR CNC Turning, etc

mint I/O data collection

Post by neilo » Thu 13 Oct , 2022 22:25 pm

I am working on a project collecting data from a vibration transmitted attached onto a VMC1300. I would like to know if it is possible to collect the data that is shown in the mint I/O debug in a format that can be ported into a database and/or spreadsheet. By querying when the vibration is outside acceptable limits, associate that with the lines of code, spindle speed, RPM, tool location, etc., and if yes, how to go about it. Thanks in advance. Best Regards. re:attachment.
Attachments
mint IO debug.png
mint IO debug.png (414 KiB) Viewed 5388 times

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: mint I/O data collection

Post by Steve » Fri 14 Oct , 2022 10:51 am

Hi,

I dont think think that this is somthing like this could be done easily or without a lot of development work.

Is this somthing you would be willing to pay to have developed?

neilo
Posts: 3
Joined: Mon 02 May , 2022 18:31 pm
Hardware/Software: VMC 1300 , Turn 270 , Router 2600. VR-Milling-V5, VR CNC Turning, etc

Re: mint I/O data collection

Post by neilo » Fri 21 Oct , 2022 17:24 pm

Thank you for your response. No, the school wouldn't be willing to pay for the development work.

TDIPower
CNC Guru
CNC Guru
Posts: 613
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: mint I/O data collection

Post by TDIPower » Fri 21 Oct , 2022 23:01 pm

I think Steve quite fancied having a go at this :)

Pete

Post Reply